The sliding gate operators are used to drive sliding gates for industrial,
commercial and residential uses. The operators can be fitted with gear
wheel or chain wheel according to your needs, and featured with powerful
starting strength, capable of overwork at short time. In case of power
failure, an emergency release key allows operate gate manually.
|
Sliding gate
|
![Sliding extension gate](/images/sliding8.jpg)
Extension sliding gate
|
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
Gear-drive or chain-drive is optional
Magnetic or spring limit switch is optional
The self-locking electromechanical gear motor keeps the gate completely
closed
Motor torque adjustment
Stop on closing if it hits obstruction
Overheat & Overload dual protection
Emergency release key in case of power failure
Control panel wiring are available to alarm lamp, remote controller,
photocells, loop detector and IC card, etc.
Available in DC24V version, which can be operated by two storage
batteries DC12V each.
|
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
|
Model: SDC-300CP
Power:24V 50HZ Motor Power:80W Protection Level:44IP Max. Torque:38Nm Open Speed:14m/s Max Gate Weight:300kg Woring Temp:-20oC +50oC Insulation Class:1 Work Cycle:70%
User Mannual: SDC-300CP![](/images/pdf1.gif)
Gear wheel & Magnetic limit
switch
The self-locking gear motor
Safety Obstruction Reverse (An infrared photocells must be installed)
Overheat & Overload dual protection
Emergency release key in case of power failure
Control panel wiring are available to alarm lamp, remote control, photocells,
loop detector, IC card. |
|
|
![](/uploads/gate-door-automation/slide-door/_1304114y.jpg)
Electric controller
|
Magnetic limit switch
internal view
|
Spring limit switch
internal view |
![](/images/gear-rack.gif) Gear rack
- 1005*30*12mm
- Module = 4
- Galvanized
- 4 pcs/carton
|
|
|
|
|
|